DV-10X4 MKII | MC Phono Cartridge | Dynavector International Site

HOME > Products > MC Cartridge > DV-10X4 MKII

DV-10X4 MKII

High Output with Aluminium Cantilever


Discontinued model
10X4MK2 MC Cartridge

Description

Since its debut in 1978, this cartridge has been widely accepted as the best high output moving coil cartridge at its price point and well beyond. Now the 10X4MK2 is further improved with a redesigned magnet circuit giving greater dynamic performance and musicality.

10X4MK2 is a high output moving-coil (2.5mV) cartridge which means it will work just dandy into most phono stages designed for moving-magnet cartridges.


Specifications

Type High output moving coil cartridge with flux damper and softened magnetism
Output Voltage 2.5mV (at 1KHz, 5cm/sec.)
Channel Separation 25 dB (at 1KHz)
Channel balance 1.0 dB (at 1KHz)
Frequency response 20 - 20,000Hz (± 1dB)
Compliance 12 mm/N
Tracking force 1.5 - 1.9 g
Impedance 270 ohms
Recommended load impedance > 47K ohms
Cantilever 6mm length aluminium pipe
Stylus tip Elliptical
Weight 4.6 g

MC Cartridge Line UP